MechanicalAccessory

Terminal-strip cover for NEMA 2 rating (-T models).

PVC Weathershield for LM../LF.. Series

PVC Weathershield for GM../GK.. Series

PVC Weathershield for GK.. Series

PVC Weathershield for AF.. Series

PVC Weathershield for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

Weathershield for EV/RV..and AV.. Series (cover only)

Weathershield for LV/SV.. Series (cover only)

ePIV and Energy Valve Weather Shield

ePIV and Energy Valve Weather Shield

ePIV and Energy Valve Weather Shield

ePIV and Energy Valve Weather Shield

CCV Weather Shield Kit AF/NF/LF

PICCV/CCV Weather shield NFRB/AFRB

CCV Weather Shield Kit AR/LR

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

ZS-BFV-90 BFV Weathershield Dual AF/GM Series (2-way) HD/U & VIC valves below 4"

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7 for AF.. Series

1" shaft adaptor for ZS-300(-5).

3/4" shaft adaptor for ZS-300(-5).

1/2" shaft adaptor, standard wtih ZS-300(-5).

NEMA 4X, 316L stainless steel enclosure.

NEMA 4X, 304 stainless steel enclosure.

Explosion proof housing.

Weather shield - polycarbonate with foam seal (16” L x 8-3/8” W x 4” D).

Base plate for ZS-100.

Weather shield - galvaneal (13” L x 8” W x 6” D).

TFB(X) Mounting Hardware without bracket.

TFB(X) crankarm adaptor kit (T bracket included).

TFB(X) crankarm adaptor kit (includes ZG-113).

Shaft extension for 1/2" diameter shafts (3.8" L).

AMB(X), NMB(X), NKQB(X) crankarm adaptor kit.

Shaft extension for 1/2" diameter shafts (5" L).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (3" L).

LF Trane Voyager retrofit kit (includes bracket and mounting hardware).

LF crankarm adaptor kit (T bracket included).

LF crankarm adaptor kit (includes ZG-112).

1.05" diameter jackshaft adaptor (12" L).

1-5/16" diameter jackshaft adaptor (12" L).

1" diameter jackshaft adaptor (11" L).

GKB(X), GMB(X) crankarm adaptor kit.

EFB(X) crankarm adaptor kit.

Honeywell ECON retrofit kit without module bracket.

Honeywell ECON retrofit kit with module bracket.

Damper clip for damper blade, 6” width.

Damper clip for damper blade, 3.5” width.

AFB(X)/NFB(X) crankarm adaptor kit.

AFB(X)/NFB(X) crankarm adaptor kit.

Classic AF/NF crankarm adaptor kit with ZG-108.

Classic AF/NF crankarm adaptor kit

Jackshaft mounting bracket.

Bracket for AHK/AH/LH linear actuators.

AFB(X)/NFB(X) channel mounting bracket (5-7/8" H x 5-1/2" W x 2-19/32" base).

TFB(X) right angle bracket (4-1/2" H x 5-1/2" W x 2-1/2" base).

LF right angle bracket (4-1/2" H x 5-1/2" W x 2-1/2" base).

Stand-off bracket for ZS-260.

Right angle bracket for ZS-260.

Right angle bracket for NMB(X).

Universal right angle bracket (13-5/8" H x 7-1/2" W x 4" base).

Universal right angle bracket (7-1/2" H x 11" W x 2-3/4" base).

Dual actuator mounting bracket.

Universal right angle bracket (13" H x 11" W x 7-7/16" base).

Universal right angle bracket (17" H x 11-1/8" W x 6" base).

8x8 mm form fit adaptor for LF.

Angle of rotation limiter for TFB(X).

Angle of rotation Limiter for LF.

Angle of rotation limiter for Classic AF/NF.

Classic AM/SM to AMB(X) retrofit bracket.

20 piece Z-AF kit.

Position indicator CM.

NM to NMB(X) retrofit mounting bracket.

3/8”-16 shaft clevis for AHK/AH.

5/16” shaft clevis for LH.

Classic GM to GMB(X) retrofit bracket.

Rotary support for lateral force compensation in AHK/AH/LH.

Anti-rotation bracket CM.

Classic AF/NF to AFB(X)/NFB(X) retrofit mounting bracket.

Linkage kit

Linkage kit

Linkage kit

Anti-rotation bracket TF/NKQ/AM/NM/LM.

Conduit connector, 1/2".

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Push rod for KG10A ball joint (36” L, 3/8” diameter).

TFB(X) mounting kit (T-bracket, bolts).

Anti-rotation bracket LF.

Universal crank arm for KG8 or KG10A ball joint, 21/64" slot width. For damper shafts: 3/8” to 11/16” diameter or 3/8” to 9/16” square.

Universal crank arm for KG6 ball joint, 1/4" slot width. For damper shafts: 3/8” to 11/16” diameter or 3/8” to 9/16” square.

Universal crank arm, slot width 21/64”. For damper shafts 3/4” to 1” diameter.

Universal crank arm, slot width 21/64”. For damper shafts 9/16” to 1” diameter.

TFB(X) crankarm with 1/4" slot.

TFB(X) crankarm with 5/16" slot.