ACI A/1K-3W-LT-BP-8'

ACI A/1K-3W-LT-BP-8'

ACI A/1K-3W-LT-INW-2.5

ACI A/1K-3W-LT-INW-2.5"-BB

ACI A/1K-3W-LT-D-12"-BB

1,000 Ohm (Three Wires) RTD, Low Temperature Duct, 12"  316SS, NEMA 3R Enclosure
Availability: In stock
ACI A/1K-3W-LT-D-12"-BB

The ACI Low Temperature Duct Series sensors and transmitters are a single point duct sensor featuring a three wire RTD sensor assembly using Teflon Lead wires and a 316 Series stainless steel probe. The three wire sensors can be used with a two wire transmitter by connecting the two (Red) colored wires to one of the RTD Terminal blocks with the third wire (White) wire going to the second RTD Terminal block. The purpose of the third wire is to compensate for external lead wire resistance that will affect the accuracy of your sensor output when using with a three wire temperature transmitter or sensor configuration on your Building Management System or PLC (Programmable Logic Controller. ACI recommends the use of 18 AWG lead wires to reduce the external lead wire resistance when using a Platinum RTD. The operating specifications are for both the sensor and transmitter as designated in the specification table. Standard enclosure options include the “-GD” Galvanized or “-BB” Aluminum weather proof enclosure. NIST Certificates are available for all of the configurations listed in the ordering grid on the back of the product data sheet. For best accuracy, ACI recommends the use of the TTM100 or TTM1K Series Matched transmitters since they include a second calibration step in which the RTD and transmitter are calibrated together as a system, in order to remove most of the sensor error over the calibrated temperature span of the transmitter. Applications: Pharmaceutical, Liquid Nitrogen, Refrigerators, Freezers, Hydronic Heating, Remote Sensor Applications

More Information
Hide Price For All Country Except Canada No
Write Your Own Review
You're reviewing:ACI A/1K-3W-LT-D-12"-BB
Your Rating