Accessories

1/2" NPT conduit adaptor for 22WDP and 01DTS sensors

Outdoor sensor light – active 0..10 V, Li65V

Ceiling multi sensor light + motion – active 0..10 V (light), relay (motion)

Stainless Steel Room Sensor passive, NTC20k

Stainless Steel Room Sensor passive, NTC10k3 (Precon)

Stainless Steel Room Sensor passive, NTC10k (10k2)

Stainless Steel Room Sensor passive, Pt1000

Stainless Steel Room Sensor passive

24V Floating Thermostat

Replacement sensor module O? (Oxygen depletion), 0...50% vol., Electro-chemical

Replacement sensor module O? (Oxygen leak), 0...50% vol., Electro-chemical

Replacement sensor module CL? (Chlorine), 0...10 ppm, Electro-chemical

Replacement sensor module H?S (Hydrogen Sulfide), 0...50 ppm, Electro-chemical

Replacement sensor module H? (Hydrogen), 0...50% LEL, Catalytic

Replacement sensor module C?H? (Propane), 0...50% LEL, Catalytic

Replacement sensor module CH? (Methane), 0...50% LEL, Catalytic

Replacement sensor module NH? (Ammonia), 0...250 ppm, Electro-chemical

Three-way valve manifold with high and low pressure ports and equalizer valve

Thermoelectric tripping device with control key, with plug, Duct inside temperature 72°C (color black), Duct outside temperature 72°C, Probe length 2.6" [65 mm]

Thermoelectric tripping device with control key, Duct inside temperature 72°C (color black), Duct outside temperature 72°C, Probe length 2.6" [65 mm]

165° F electric thermal sensor, SPST, normally closed.

Mounting bracket for 22WDP-.., Metal

Pipe connector, Stainless steel, Pipe 0.3" [8 mm] to 1/4" NPT (external thread), Set of 2 pcs.

Pipe connector, Brass, Pipe 0.3" [8 mm] to 1/4" NPT (external thread), Set of 2 pcs.

Pipe connector, Stainless steel, Pipe 0.24" [6 mm] to 1/4" NPT (external thread), Set of 2 pcs.

Pipe connector, Brass, Pipe 0.24" [6 mm] to 1/4" NPT (external thread), Set of 2 pcs.

Reduction adapter, 1/4" NPT (internal thread) to 1/2" NPT (external thread)

Thermowell (fabricated) Stainless steel, 2" [50 mm], 1/2" NPT, SW=0.94"

T-piece with thermowell, DN 2" [50]

T-piece with thermowell, DN 1 1/2" [40]

T-piece with thermowell, DN 1 1/4" [32]

T-piece with thermowell, DN 1" [25]

T-piece with thermowell, DN 3/4" [20]

T-piece with thermowell, DN 1/2" [15]

Adapter

Cold barrier, Plastic, L 50 mmFor thermowell pocket A-22P-A..

Syringe with thermal paste

Fixing strap, with thermal paste for pipes up to Ø 0.8...9.8" [20...250 mm]

Fixing strap, with thermal paste for pipes up to Ø 0.8...4.3" [20...110 mm]

Thermowell pocket (machined) Stainless steel, 8" [200 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 6" [150 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 4" [100 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 2" [50 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 18" [450 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 12" [300 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 8" [200 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 6" [150 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 4" [100 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Brass, 2" [50 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 18" [450 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 12" [300 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 8" [200 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 6" [150 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 4" [100 mm], 1/2" NPT, wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 2" [50 mm], 1/2" NPT, wrench size 3/4"

Transformer, 50 VA

Regulator (0.5 LPM) For Sensor Module Calibration

Alarm Horn

External visual alarm

High-Low Mounting Kit

Duct Mount Enclosure

Splash Proof Enclosure

Transformer, 100 VA

Bluetooth dongle for Belimo Duct Sensor Assistant App, certified and available in North America, European Union, EFTA States and UK

Connection adapter, 1/2"For cable 1x6 mmMultipack 10 pcs.

Mounting flange for duct sensor 19.5 mm, up to max. 120°C [248°F], Plastic

Mounting clip, with screws and adhesive foil

Mounting plate L housing

Mounting plate S housing

Mounting kit, with mounting brackets

Replacement filter, wire mesh, Stainless steel

Mounting flange for sensor probe 6 mm, up to max. 260°C, Brass

50 piece bulk pack of mounting flanges for sensor probe 6 mm, up to max. 120°C [248°F], Plastic

Mounting flange for sensor probe 6 mm, up to max. 120°C [248°F], Plastic

Duct connector kit, PVC tube 2 m, 2 connection elements (Plastic) for 22ADP-..

Duct connector kit for 01APS-..Multipack 50 pcs.

Duct connector, Metal, L 4", Tube connection 0.2"

Duct connector, Metal, L 1.5", Tube connection 0.2"

Connector 6-8 PG11 1/2" w/o stopper

Lenshead screw M4x96, Phillips, Tuf