TCS PHR1000 Humidity Sensor

Description

Low Profile Delta Style Enclosure with Optional Display

Humidity Only or Temperature/Humidity Combo

2% and 3% RH Accuracies

Optional Communications Jack

User Adjustable Toggle Rate Between Temp & Humidity Display

Wide Selection of Temperature Sensing Elements

Full-range Temperature Compensation of RH Signal

Five Year Warranty

Features:

The Delta Style room units are available as Humidity Only sensors or as Combination temperature and humidity sensors. They feature an optional display with a user adjustable toggle rate between humidity and temperature and can display in either °C or °F. The unit is available with the entire line of BAPI temperature sensors. If a temperature transmitter and humidity transmitter are desired, then see the “X-Combo” Unit on pages B10-11 of this section.

SPECIFICATIONS:

Power: 10 to 35 VDC (0 to 5 VDC or 4 to 20 mA Outputs) 15 to 40 VDC (0 to 10 VDC Output) 12 to 24 VAC (0 to 5 VDC Output) 15 to 28 VAC (0 to 10 VDC Output)

Note: If AC power is used, it must be shielded from the signal wiring

Power Consumption: 22 mA max. DC (0 to 5 VDC or 4 to 20 mA Outputs) 6 mA max DC (0 to 10 VDC Output) 0.53 VA max. AC (0 to 5 VDC Output) 0.14 VA max. AC (0 to10 VDC Output)

Sensing Elements: Temperature – Thermistor or RTD (See “Sensors” section for specs.) Humidity – Capacitive Type, ±2% or ±3%RH @ 25°C (77°F), 20 to 80%RH%RH

Calibration Adjustment: ±5% POTWiring: 2 to 3 pair of 16 to 22 AWG*

Mounting: 2”x4” J-box or drywall mount – screws providedEnvironmental Operation

Range:Temp: 32 to 122 oF (0 to 50 oC)

Humidity: 5 to 95%, non-condensingMaterial & Rating: ABS Plastic , UL94 HB

Agency: RoHS and CE *BAPI recommends that you do not run wiring for the room units in the same conduit as line voltage wiring or with wiring used to supply highly inductive loads such as motors, generators and coils.