Actuators

Service Tool, with ZIP-USB functionFor and communicative Belimo actuators / VAV controller and HVAC performance devices

FBGL W'Shld for F7 HS(U) below 4" AF/GM (specify valve size)

FBGL W'Shld for F6 HS(U) (AFx2, 2.5"-3")

FBGL W'Shld for F6 HS(U) (GMx2, 4"-6")

PVC W'Shld for F6/F7 for AF.. Series

PVC W'Shld for F6/F7HS(U) (GM)

BFV Weather Shield Kit GR

FBGL W'Shld for F7 HS(U) (GMx2, 4"- 6")

Shaft extension, 1"For ZS-300

Shaft extension, 3/4"For ZS-300

Shaft extension, 1/2"For ZS-300

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Explosion Proof Housing, 16x10x6.435" [406x254x164 mm] (LxWxH)For NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 16x8-3/8x4" [406x213x102 mm] (LxWxH)

Base PlateFor ZS-100

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Valve neck extension for ball valve DN 15...50

Base plate extension for NM..A to NM..

Replacement temperature sensors, 5 ft [1.5 m]For Belimo Energy Valve™0.5...2" [15...50]

Replacement temperature sensors, 10 ft [3 m]For Belimo Energy Valve™0.5...2" [15...50]

3/8”-16 shaft clevis for AHK/AH.

5/16” shaft clevis for LH.

Transformer, AC 120 V to AC 24 V, 40 VA

TFB(X) Mounting Hardware without bracket

TFB(X) crankarm adaptor kit (T bracket included).

TFB(X) crankarm adaptor kit (includes ZG-113).

Mounting plate for SGF.

Resistor KitFor -MFT95 actuator in 0…135 ? control application

Resistor Kit, 50% voltage divider

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Shaft extension for 1/2" diameter shafts (3.8" L).

Mounting kit for linkage operation for flat installation

Base plate extension for GM..A to GM..

Shaft extension for 1/2" diameter shafts (5" L).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (3" L).

LF Trane Voyager retrofit kit (incl. bracket and hardware).

LF crankarm adaptor kit (T bracket included).

LF crankarm adaptor kit (includes ZG-112).

1.05" diameter jackshaft adaptor (12" L).

1-5/16" diameter jackshaft adaptor (12" L).

1" diameter jackshaft adaptor (11" L).

ZG-HND PR Series Actuator Hand Crank

Repack KitFor Belimo G2B, G2S, G3B series globe valves

Repack Kit for Belimo G6, G7 series globe valves, Bronze trim

Repack Kit for Belimo G6, G7 series globe valves, Stainless steel trim

Repack KitFor Schneider VB7000 style G2, G3 series globe valves1...2" [25...50]

Mounting kit for linkage operation for flat installation

Mounting kit for linkage operation for flat and side installation

Honeywell ECON retrofit kit without module bracket.

Honeywell ECON retrofit kit with module bracket.

Damper clip for damper blade, 6” width.

Damper clip for damper blade, 3.5” width.

Electrical junction box for LF.

Mounting kitFor foot mount installation

Mounting kit for linkage operation for flat and side installation

FSAF..A series crankarm adaptor kit with ZG-108

Leg kit for FSAF_A series actuators

Classic AF/NF crankarm adaptor kit with ZG-108.

Classic AF/NF crankarm adaptor kit.

ZG-JSL support plate for EFB(X)

Jackshaft mounting bracket.

Bracket for AHK/AH/LH linear actuators.

AFB(X)/NFB(X) U bracket 5-7/8x5-1/2x2-19/32" (HxWxD).

TFB(X) right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

LF right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

Stand-off bracket for ZS-260.

Right angle bracket for ZS-260.

Right angle bracket for NMB(X).

Univ. right angle bracket 13-5/8x7-1/2x4" (HxWxbase).

Univ. right angle bracket 7-1/2x11x2-3/4" (HxWxbase).

Dual actuator mounting bracket.

Univ. right angle bracket 13x11x7-7/16" (HxWxbase).

Univ. right angle bracket 17"x11-1/8"x6" (HxWxbase).

Form fit adapter, 8x8 mmFor LF..

Temperature sensor - threaded pipe body 3/4"

Temperature sensor - threaded pipe body 1/2"

Temperature sensor fitting for Belimo Energy Valve™ 2" 50, threaded pipe body

Temperature sensor fitting for Belimo Energy Valve™ 1 1/2" 40, threaded pipe body

Temperature sensor fitting for Belimo Energy Valve™ 1 1/4" 32, threaded pipe body

Temperature sensor fitting for Belimo Energy Valve™ 1" 25, threaded pipe body

Rotary supportFor linear actuatorFor compensation of transverse forces

Angle of rotation limiter, with end stop

Angle of rotation limiter, with end stop

Angle of rotation limiter for Classic AF/NF.

Spindle extension CQ

Housing cover CQ for Belimo ZoneTight™, Colour: RAL-white

Manual flow setterFor Belimo ZoneTight™

Spare tripping element for BAE, duct inside temperature 95°C, Probe length 2.6" [65 mm]

Spare tripping element for BAE, Duct inside temperature 72°C (color black), Probe length 2.6" [65 mm]

Anti-rotation clipFor CM..for UM..Multipack 20 pcs.

Retrofit clipFor NF..A / SF..A

VAV-Universal, modular control solution with integrated ?p sensor for polluted media. Can be combined with damper actuator optimally suited to the room pressure application. Field of application: technical building equipment, HVAC systems

VAV-Universal, modular control solution with integrated ?p sensor for polluted media. Can be combined with damper actuator optimally suited to the VAV/pressure duct application. Field of application: technical building equipment, HVAC systems

VAV-Universal, modular control solution with integrated ?p sensor. Can be combined with damper actuator optimally suited to the application. Application field: technical building equipment, HVAC systems

Rotary Actuator, 1 Nm, AC/DC 24 V, 2...10 V, 22 s, IP20, clockwise rotation, Connector Plug

Rotary Actuator, 1 Nm, AC/DC 24 V, 2...10 V, 22 s, IP20, counter-clockwise rotation, Connector Plug

Rotary Actuator, 1 Nm, AC/DC 24 V, 2...10 V, 22 s, Form fit 8x8 mm, IP20, clockwise rotation, Connector Plug

Rotary Actuator, 1 Nm, AC/DC 24 V, 2...10 V, 22 s, Form fit 8x8 mm, IP20, counter-clockwise rotation, Connector Plug