Motor

0.75 HP - OPEN - 1075 RPM, Permanent Split Capacitor, Commercial Condenser Fan, 5.6" Dia., All Angle Mounting, Hub Ring Mount (2-1/4")

Condenser Fan, PSC, 50/60 hz, open end shield-OLE, automatic reset thermal overload protector, ball bearings, 36" leads, 1/2 HP, 1725 RPM, 208-230 Volts, 2.7 Amps, 5.6" Dia, 15 lbs. Replaces: 259983, K55HXCTP9963, D890

0.25 HP - TEAO - 1725 RPM, Split Phase & Permanent Split Capacitor, Centrifugal Ventilation Direct Drive Blower, Totally Enclosed Air Over (TEAO), Resilient/Stud Mount, 5.6", & 6.3" Diameter

1 HP - ODP - 1725 RPM, General Purpose, Single Phase, Capacitor Start, Resilient Base, Two Speed

0.167 HP - OPEN - 1550 RPM, Permanent Split Capacitor, Refrigeration Condenser Fan, Open & Totally Enclosed Air Over, Horizontal, Stud or Bracket Mount, Capacitor Included

0.25 HP - N/A - 1625 RPM, Refrigeration Condenser Fan, 5.6" diameter Permanent Split Capacitor

0.167 HP - OPAO - 1550 RPM, Refrigeration Condenser Fan, 5.6" diameter Permanent Split Capacitor

0.25 HP - OPEN - 1550 RPM, Refrigeration Condenser Fan, 5.6" diameter Permanent Split Capacitor

Carbonator Pump, split phase, open drip proof, resilient base, single speed, 1/3HP, 1725RPM, 115/230VAC, sleeve bearing, #48Y frame, 6.2/3.1A, reversible rotation, threaded conduit hole, automatic thermal overload protector, special slotted shaft,...

0.5 HP - ODP - 1725 RPM, Special Application Carbonator Pump, Single Phase, Split Phase

Carbonator Pump, split phase, open drip proof, resilient base, single speed, 1/4HP, 1725RPM, 115/230VAC, sleeve bearing, #48Y frame, 4.4/2.2A, reversible rotation, threaded conduit hole, automatic thermal overload protector, special slotted shaft,...

0.25 HP - OPAO - 1075 RPM, Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Hub Ring Mount (2.5"), 3-Speed

Oil Burner, split phase, ventilated, flange mounted, single speed, 1/7HP, 3450RPM, 115VAC, sleeve bearing, #48M frame, 2.0A, 1/2" shaft diameter, 20" leads, non-reversible rotation, class A insulation, manual thermal overload protector.

Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 4-Speed, 3/4 HP, 1075/3 ROM, 230V, 60 HZ, 6.1-5.8A, NEMA Frame 48Y, 20 lbs.

Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 4-Speed, 3/4 HP, 1075/4RPM, 115V, 10.6A, 60 HZ, NEMA Frame 48Z, Sleeve Bearing, 18 lbs

Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 4-Speed, 1/2 HP, 115V, 1075 RPM, 60 HZ, 7.1A, Sleeve Bearing, NEMA Frame 48YZ, 18 lbs

4 speed Economizer Blower

Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 4-Speed, 1/3 HP, 1075/4 RPM, 115V, 60 HZ, 4.6A, NEMA Frame 48Y, 12 lbs.

4 speed Economizer Blower

Belted Fan & Blower, split phase, open drip proof, resilient base, two speed, 3/4HP, 1725/1140RPM, 115VAC, sleeve bearing, #56 frame, 11.5A, 5/8" shaft diameter, reversible rotation, class A insulation, threaded conduit hole, automatic thermal overload...

Belted Fan & Blower, split phase, open drip proof, resilient base, two speed, 1/2HP, 1725/1140RPM, 115VAC, sleeve bearing, #56 frame, 8.7A,1/2" shaft diameter, reversible rotation, class A insulation, threaded conduit hole, automatic thermal overload...

Belted Fan & Blower, split phase, open drip proof, resilient base, two speed, 1/3HP, 1725/1140RPM, 115VAC, sleeve bearing, #56 frame,6.4A, 1/2" shaft diameter, reversible rotation, class A insulation, threaded conduit hole, automatic thermal overload...

Rescue EcoTechTM High Efficient Direct Drive Blower Motor 1 to 1/2 HP, 1075 RPM, 11.5/6.9 Amps, 115/230 Volts, Thermally & Electronically Protected

Rescue EcoTechTM High Efficient Direct Drive Blower Motor 3/4 to 1/3 HP, 1075 RPM, 8.5/5.2 Amps, 115/230 Volts, Thermally & Electronically Protected

Rescue EcoTechTM High Efficient Direct Drive Blower Motor 1/2 to 1/4 HP, 1075 RPM, 6.2/3.9 Amps, 115/230 Volts, Thermally & Electronically Protected

Rescue EcoTechTM High Efficient Direct Drive Blower Motor 1/3 to 1/5 HP, 1075 RPM, 4.2/2.7 Amps, 115/230 Volts, Thermally & Electronically Protected

0.75 HP - ODP - 1075 RPM, Permanent Split Capacitor, Commercial Condenser Fan, 5.6" Dia., All Angle Mounting, Hub Ring Mount (2-1/4")

"Rescue Motor" - Direct Drive Blower, ball bearing, open, air over, automatic thermal overload, 5.6" diameter, replaces all 208/230V 3/4 HP motors, 3.6 Amps., 1075/4RPM, 36" leads, CCWLE, reversible, kit with 4 nuts with captive star washers shipped in...

"Rescue Motor" - Direct Drive Blower, ball bearing, open, air over, automatic thermal overload, 5.6" diameter, replaces all 115V 3/4 HP motors, 7.3 Amps., 1075/4RPM, 36" leads, CCWLE, reversible, kit with 4 nuts with captive star washers shipped in...

0.333 HP - OPAO - 825 RPM, RESCUE Motors Permanent Split Capacitor, Direct Drive Fan & Blower, 5.6" Diameter, Open Air Over

0.5 HP - TEAO - 1075 RPM, RESCUE Motors Permanent Split Capacitor, Condenser Fan, 5.6" Diameter

PERMANENT SPLIT CAPACITOR Rescue Motors 5.6" Dia, Condenser Fan Motors, 60 C Rated, Totally Enclosed Air Over, HP 1/2, RPM 1075, Speed Tap High, Volts 208-230.

0.333 HP - TEAO - 825 RPM, RESCUE Motors Permanent Split Capacitor, Condenser Fan, 5.6" Diameter

PERMANENT SPLIT CAPACITOR Rescue Motors 5.6" Dia, Condenser Fan Motors, 60 C Rated, Totally Enclosed Air Over, HP 1/3, RPM 825, Speed Tap high, Volts 208-230.

OEM Replacement for Specific Manufacturers, RHEEM, Direct Drive Blower, HP 3/4, RPM 1075/4, Volts 115.

"Rescue Motor" - Condenser Fan, sleeve bearing, totally enclosed, automatic thermal overload, 5.6" diameter, replaces all 208/230V 1/2 to 1/6 HP motors, 2.6 Amps., 1075RPM, 36" leads, CCWLE, reversible, uses 5.0 or 7.5 MFD 370V capacitor (capacitor not...

"Rescue Motor" - Direct Drive Blower, sleeve bearing, open, air over, automatic thermal overload, 5.6" diameter, replaces all 208/230V 1/2 to 1/6 HP motors, 3.6 Amps., 1075/4RPM, 36" leads, CCWLE, reversible, kit with 4 nuts with captive star washers...

"Rescue Motor" - Direct Drive Blower, sleeve bearing, open, air over, automatic thermal overload, 5.6" diameter, replaces all 115V 1/2 to1/6 HP motors, 7.3 Amps., 1075/4RPM, 36" leads, CCWLE, reversible, kit with 4 nuts with captive star washers shipped...

0.167 HP - TEAO - 825 RPM, OEM Replacement For Specific Manufacturers

0.125 HP - TEAO - 825 RPM, OEM Replacement For Specific Manufacturers

0.33 HP - TEAO - 1075 RPM, OEM Replacement For Specific Manufacturers

OEM Replacement, Rheem Condenser fan, PSC, totally enclosed, 1/5 HP, 1075 RPM, 208/230V, 2.0 A, automatic thermal overload, sleeve bearings, 4 studs opposite shaft end, reversible, 3.0 MFD - not supplied.

0.5 HP - OPEN - 1075 RPM, OEM Replacement For Specific Manufacturers

0.2 HP - TEAO - 1075 RPM, OEM Replacement For Specific Manufacturers

Rescue Motor - Permanent Split Capacitator, Condenser Fan, 5"0 Diameter, Totally Enclosed Air Over, 1/4 to 1/8 HP, 1625 RPM, 1.5 Amps, 208-230 Volts.

Resue Motor - Condenser Fan, EZ-FIT Mounting System, Sleeve Bearing, Totally Enclosed, Automatic Thermoal Overload, 5" Diameter, Replaces all 208/230V 1/4 to 1/6 HP Motors, 1.5 Amps, 1075 RPM, 48" Leads, CCWLE, Reversible, Uses 5.0 MFD, 370V Capacitor...

Resue Motor - Condenser Fan, EZ-FIT Mounting System, Sleeve Bearing, Totally Enclosed, Automatic Thermoal Overload, 5" Diameter, Replaces all 208/230V 1/8 to 1/12 HP Motors, 8 Amps, 1075 RPM, 48" Leads, CCWLE, Reversible, Uses 5.0 MFD, 370V Capacitor...

0.33 HP - OPEN - 825 RPM, Permanent Split Capacitor, Condenser Fan, 5.6 Diameter, Open Dripproof Air Over, Hub Ring Mount (2 1/4"), Shaft Up or Horizontal, Without Capacitor

Condenser Fan, permanent split capacitor, ball bearing, 5MFD capacitor, 1.8A, not high efficiency,1/3HP, 1625RPM, 60Hz, class B insulation, continuous duty, air over, 20" leads, automatic thermal overload protector, extended studs, water slinger,...

Condenser Fan, permanent split capacitor, 7.5MFD capacitor, open drip proof, 5.6" diameter, resilient base, single speed, 1/3HP, 1075RPM, 230VAC, ball bearing, 5MFD capacitor, 2.2A, high efficiency, 60Hz, class B insulation, continuous duty, air over,...

0.33 HP - ODP - 1625 RPM, Permanent Split Capacitor, Condenser Fan, 5.6 Diameter, Open Dripproof Air Over, Resilient Base, Shaft Up or Horizontal, With Capacitor

1 HP - OPEN - 1100 RPM, OEM Replacement For Specific Manufacturers

1 HP - ODP - 3450 RPM, Belted Fan & Blower, Capacitor Start

0.75 HP - ODP - 3450 RPM, Belted Fan & Blower, Capacitor Start

0.5 HP - ODP - 1140 RPM, Belted Fan & Blower, Split Phase, Resilient Base, 2-Speed (NEMA 56 Frame), 1800/1200 RPM

Belted Fan & Blower, open drip proof, capacitor start, resilient base, single speed, 1 1/2HP, 115/208-230VAC, 1725RPM, ball bearing, #56 frame, 22.4/11.2A, 5/8" shaft diameter, class A insulation, reversible rotation, all angle rotation, automatic...

0.25 HP - OPEN - 975 RPM, Packaged Terminal A/C Heat Pump, Single Shaft, Direct Drive Blower

Belted Fan & Blower, split phase, open drip proof, resilient base, single speed, 3/4HP, 1725RPM, 115/230VAC, sleeve bearing, #56 frame, 11.2/5.6A, 5/8" shaft diameter, reverse. rotation, class B insulation, threaded conduit hole, automatic thermal...

0.5 HP - ODP - 1725 RPM, Belted Fan & Blower, Split Phase, Resilient Base, Single Speed

2 HP - ODP - 3450 RPM, Capacitor Start, Capacitor Run, Belted Fan & Blower, Open Dripproof (ODP), Resilient Base, Single Speed

0.5 HP - OAO - 1075 RPM, Permanent Split Capacitor, Condenser Fan, 5.6 Diameter, Open Dripproof Air Over, Stud Mount, Shaft Up or Horizontal, Without Capacitor

0.25 HP - OPEN - 1075 RPM, Permanent Split Capacitor, Condenser Fan, 5.6 Diameter, Open Dripproof Air Over,Stud Mount, Shaft Up or Horizontal, Without Capacitor

Condenser Fan, high efficiency, permanent split capacitor, open drip proof, 5.6" diameter, resilient base, with capacitor, single speed, 1/2HP, 1075RPM, 230VAC, sleeve bearing, 7.5MFD capacitor, 3.1A, not high efficiency, 60Hz, class B insulation,...

Condenser Fan, high efficiency, permanent split capacitor, 7.5MFD capacitor, open drip proof, 5.6" diameter, resilient base, single speed, 1/3HP, 1075RPM, 230VAC, sleeve bearing, 5MFD capacitor, 2.2A, not high efficiency, 60Hz, class B insulation,...

0.25 HP - OPEN - 1075 RPM, Permanent Split Capacitor, Condenser Fan, 5.6 Diameter, Open Dripproof Air Over, Resilient Base, Shaft Up or Horizontal, With Capacitor

0.5 HP - OAO - 1075 RPM, Permanent Split Capacitor Flex Mount, Direct Drive Fan & Blower, 5.6" Diameter, Open Air Over (OAO)

1/2 hp 1075/3 115V Flex Mount Like AOS FML1056, GE 3787

1/3 hp 1075/3 208-230V Flex Mount Like AOS FM1036, GE 3786

1/3 hp 1075/3 115V Flex Mount Like AOS FML1036, GE 3785

0.25 HP - OAO - 1075 RPM, Permanent Split Capacitor Flex Mount, Direct Drive Fan & Blower, 5.6" Diameter, Open Air Over (OAO)

1/4 hp 1075/3 115V Flex Mount Like AOS FML1026, GE 3783

Permanent Split Capacitor Condenser Fan, 5.6" Diameter, Totally Enclosed Air Over (TEAO), Stud Mount, Without Capacitor, High Ambient Design, All Angle Mount 3/4 HP, 1075 RPM, 460V, 2.0A, 60 HZ, NEMA Frame 48Y, 22 lbs, TE BALL

0.75 HP - TEAO - 1075 RPM, Permanent Split Capacitor Condenser Fan, 5.6" Diameter, Stud Mount, Without Capacitor, 60C Ambient Design, All Angle Mount

0.5 HP - TEAO - 1075 RPM, Permanent Split Capacitor Condenser Fan, MOJAVE Series, 5.6" Diameter, Stud Mount, Without Capacitor, Extreme High Ambient Design, All Angle Mount

0.5 HP - TEAO - 1075 RPM, Permanent Split Capacitor Condenser Fan, 5.6" Diameter, Stud Mount, Without Capacitor, 60C Ambient Design, All Angle Mount

0.33 HP - TEAO - 1075 RPM, Permanent Split Capacitor Condenser Fan, MOJAVE Series, 5.6" Diameter, Stud Mount, Without Capacitor, Extreme High Ambient Design, All Angle Mount

0.25 HP - TEAO - 1075 RPM, Permanent Split Capacitor Condenser Fan, MOJAVE Series, 5.6" Diameter, Stud Mount, Without Capacitor, Extreme High Ambient Design, All Angle Mount

0.167 HP - ODP - 850 RPM, General Purpose, Single Phase, Capacitor Start, Resilient Base, Single Speed

Oil Burner, split phase, ventilated, flange mounted, single speed, 1/3HP, 1725RPM, 115VAC, sleeve bearing, #56N frame,5.0A, 1/2" shaft diameter, 20" leads, reversible rotation, class A insulation, manual thermal overload protector, 5/8" shaft adaptor.

3568 - 0.5 HP - ODP - 825 RPM, Permanent Split Capacitor, Commercial Condenser Fan, 6.3" Dia., Open Dripproof Air Over, All Angle Mounting, Hub or Stud Mount

0.75 HP - ODP - 825 RPM, Permanent Split Capacitor, Commercial Condenser Fan, 6.3" Dia., All Angle Mounting Hub or Stud Mount (4)

1 HP - ODP - 1075 RPM, Permanent Split Capacitor, Commercial Condenser Fan, 6.3" Dia., All Angle Mounting, Hub or Stud Mount (4)

Oil Burner, 1/7HP, 3450RPM, 115V

0.167 HP - TEAO - 1500 RPM, OEM Replacement For Specific Manufacturers

0.25 HP - TEAO - 1100 RPM, OEM Replacement For Specific Manufacturers

0.75 HP - OPEN - 1075 RPM, Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 4-Speed

0.143 HP - OPEN - 3450 RPM, Split Phase and Capacitor Start, Oil Burner, OEM Replacement Motors, Totally Enclosed, Beckett, Calin, Ducaune, Wayne Home

0.33 HP - OPDP - 1725 RPM, Hot Water Circulating Pump, Split Phase

0.5 HP - OPDP - 1725 RPM, Capacitor Start, Capacitor Run, Hot Water Circulating Pump, Open Dripproof (ODP), Resilient Hub Rings, NEMA Frame 56YZ

0.167 HP - ODP - 1725 RPM, Hot Water Circulating Pump, Split Phase

0.167 HP - ODP - 1725 RPM, Hot Water Circulating Pump, Split Phase

SPLIT PHASE Hot Water Circulating Pump Open Drip proof, 1/12 HP, 1725 RPM, 115 Volts, 48YZ NEMA Frame, 2.5 Amps, Mounting Bracket, Slv Bearing, 4.63 Bolt Circle, 10 Ship Wgt.

Oil Burner, split phase, non-ventilated when mounted, flange mounted, totally enclosed, single speed, 1/6HP, 1725RPM, 115VAC, sleeve bearing, #48N frame, 3.1A, 1/2" shaft diameter, 20" leads, reversible rotation, class A insulation, manual thermal...

Oil Burner, split phase, ventilated, flange mounted, single speed, 1/8HP, 3450RPM, 115VAC, sleeve bearing, #48M frame, 2.4A, 1/2" shaft diameter, 20" leads, reversible rotation, class A insulation, manual thermal overload protector. Same as 1981 except...

Oil Burner, split phase, ventilated, flange mounted, single speed, 1/8HP, 1725RPM, 115VAC, sleeve bearing, #48N frame, 2.4A, 1/2" shaft diameter, 20" leads, reversible rotation, class A insulation, manual thermal overload protector.

Belted Fan & Blower, open drip proof, capacitor start, resilient base, single speed, 1HP, 115/230VAC, 1725RPM, sleeve bearing, #56 frame, 14.0/7.0A, 5/8" shaft diameter, class A insulation, reversible rotation, all angle rotation, automatic thermal...

0.5 HP - OPEN - 825 RPM, Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6 Diameter, Open Air Over (OAO), Stud or Hub Ring Mount (2.5"), 2-Speed

Hub or stud mount, without capacitor and mounting kit, double shaft fan & blower, open drip proof, PSC, CCW rotation, 1/2HP, 1075/3 RPM/SPD, 230V, BRGS SLV, Cap MFD 5.0, 4.5A.

Room Air Conditioner, permanent split capacitor, 5MFD capacitor, open drip proof, 5.6" diameter, hub or stud mount, without capacitor and mounting kit, 3 speed, 1/3HP, 1075/3RPM, 230VAC, sleeve bearing, 2.5A, 20" leads, class B insulation,...

Room Air Conditioner, permanent split capacitor, 5MFD capacitor, open drip proof, 5.6" diameter, hub or stud mount, without capacitor and mounting kit, 3 speed, 1/4HP, 1075/3RPM, 230VAC, sleeve bearing, 1.9A, 20" leads, class B insulation,...