Sensors

Outdoor air temperature sensor; 1K ohm at 32 degrees Fahrenheit, nickel sensing element; uses metal housing.

Outdoor air temperature sensor, Platinum 1000 Ohm (385) sensing element; uses metal housing.

OUTDOOR AIR SNSR, PT 1000 OHM (385)

Button Room temperature sensor with wallplate for APOGEE Terminal Equipment Controller (TEC) with 10K ohm NTC element. Stainless steel finish.

Button Room temperature sensor with wallplate for APOGEE Terminal Equipment Controller (TEC) with 1K ohm platinum RTD (375 Alpha) element. Stainless steel finish.

Button Room temperature sensor for APOGEE Terminal Equipment Controller (TEC) with 1K ohm platinum RTD (375 Alpha) element. Stainless steel finish.

For 2 percent relative humidity outdoor air and duct sensors.

For 2 percent relative humidity outdoor air and duct sensors.

Mounting kit fir duct point sensor.

For recalibrating.

For 2 percent duct or outdoor air relative humidity element replacement.

Replacement filters for duct relative humidity and temperature sensor tips. Pore size 10 µm. Packing unit: 3 pieces per bag.

Accessory for QFA31xx and QFA41xx Outdoor Air Humidity Sensors.

NTC 10K ohm Type 2 Immersion Well Kit.

Nickel 1K 0hm Siemens Immersion Well Kit.

Platinum 1K ohm (385 Alpha) immersion well kit.

6 inch immersion well.

4 inch immersion well kit.

2.5 inch immersion well.

SENSOR, LIQUID/0-10V, 0-300 PSIG

SENSOR, LIQUID/4-20M0-300 PSIG

SENSOR, LIQUID/0-10V, 0-200 PSIG

SENSOR, LIQUID/4-20M0-200 PSIG

SENSOR, LIQUID/0-10V, 0-150 PSIG

SENSOR, LIQUID/4-20M0-150 PSIG

SENSOR, LIQUID/0-10V, 0-100 PSIG

SENSOR, LIQUID/4-20M0-100 PSIG

SENSOR, LIQUID/0-10V, 0-60 PSIG

SENSOR, LIQUID/4-20M0-60 PSIG

SENSOR, LIQUID/0-10V, 0-30 PSIG

SENSOR, LIQUID/4-20M0-30 PSIG

SENSOR, LIQUID/0-10V, 0-15 PSIG

SENSOR, LIQUID/4-20M0-15 PSIG

Differential Pressure Sensor in Conduit Bod, 0.4% FS, 0.5-in WC, 4 to 20 mA output.

Differential Pressure Sensor in Conduit Box, 0.4% FS, 0.65-in WC, 4 to 40mA output.

Differential Pressure Sensor in Conduit Box, 0.4% FS, 1-in WC, 4 to 20 mA output

Flush mount room temperature sensor with a 1,000 Ohm Platinum RTD (375 Alpha) sensing element. This room sensor has a temperature range of –40 to 240 deg F (-40 to 120 deg C) and is designed for those applications where a covered room temperature sensor i

This outdoor air RTD sensor provides input for cost-effective, accurate temperature sensing for all controllers that accept a 1000 ohm platinum RTD input. It has a temperature range of -40 to 240 degrees Fahrenheit. This sensor allows through-the-wall mou

This repair kit provides the components needed to repair all immersion temperature sensors with prefix 544-577

Liquid immersion temperature sensor with 1000 ohm Platinum (375 Alpha) element. Temperature range is from -40 to 240 degrees Fahrenheit (-40 to 116 degrees Celsius). Element is 6 inches (15 cm) long.

Liquid immersion temperature sensor with 1000 ohm Platinum (375 Alpha) element. Temperature range is from -40 to 240 degrees Fahrenheit (-40 to 116 degrees Celsius). Element is 4 inches (10 cm) long.

Liquid immersion temperature sensor with 1000 ohm Platinum (375 Alpha) element. Temperature range is from -40 to 240 degrees Fahrenheit (-40 to 116 degrees Celsius). Element is 2.5 inches (5 cm) long.

Immersion Well Repair Kit; 32 to 212 degrees Fahrenheit, 4 to 20 mA.

Liquid immersion temperature sensor with 100 ohm platinum RTD and 4 to 20 mA output. Temperature range is from 32 to 212 degrees Fahrenheit (0 to 100 degrees Celsius). Element is 6 inches (15.2 cm) long.

Liquid immersion temperature sensor with 100 ohm platinum RTD and 4 to 20 mA output. Temperature range is from 32 to 212 degrees Fahrenheit (0 to 100 degrees Celsius). Element is 4 inches (10.2 cm) long.

Liquid immersion temperature sensor with 100 ohm platinum RTD and 4 to 20 mA output. Temperature range is from 32 to 212 degrees Fahrenheit (0 to 100 degrees Celsius). Element is 2.5 inches (6.4 cm) long.

Rigid single point duct sensor with a 100 ohm platinum RTD sensing element. Temperature range is from –4 to 122 degrees Fahrenheit (-20 to 50 degrees Celsius). This unit has an 8-inch (20 cm) probe.

Rigid single point duct sensor with a 100 ohm platinum RTD sensing element. Temperature range is from –4 to 122 degrees Fahrenheit (-20 to 50 degrees Celsius). This unit has a 4-inch (10 cm) probe.

Rigid single point duct sensor with a 100 ohm platinum RTD sensing element. Temperature range is from –4 to 122 degrees Fahrenheit (-20 to 50 degrees Celsius). This unit has an 18-inch (46 cm) probe.

Flush mount room temperature sensor with a 1,000 Ohm Platinum RTD (375 Alpha) sensing element. This room sensor has a temperature range of –40 to 240 deg F (-40 to 120 deg C) and is designed for those applications where a covered room temperature sensor i

Flush mount room temperature sensor with a 1,000 Ohm Platinum RTD (375 Alpha) sensing element. This room sensor has a temperature range of –40 to 240 deg F (-40 to 120 deg C) and is designed for those applications where a covered room temperature sensor i

Rigid averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has a 48-inch (122 cm) probe.

Rigid averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has a 36-inch (91 cm) probe.

Rigid averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has a 24-inch (60 cm) probe.

Rigid averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has an 18-inch (45 cm) probe.

Flexible averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has an 8-foot (2.4 m) probe.

Flexible averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has a 25-foot (7.6 m) probe.

Flexible averaging duct sensor with a 1000 ohm platinum (375 alpha) RTD sensing element. This unit has a 16-foot (4.9 m) probe.

Single point duct sensor with 1000 ohm platimun (375 alpha) RTD sensing element. This unit has an 8-Inch (20 cm) probe.

Single point duct sensor with 1000 ohm platimun (375 alpha) RTD sensing element. This unit has a 4-Inch (10 cm) probe.

Single point duct sensor with 1000 ohm platimun (375 alpha) RTD sensing element. This unit has an 18-Inch (45 cm) probe.

This Surface Mount RTD Sensor provides input for cost-effective, accurate temperature sensing for all controllers that accept a 1000 ohm platinum RTD input. It has a temperature range of -40 to 240 degrees Fahrenheit and the 2" x 4" metal box is attached

Flush-mount room sensor for Terminal Equipment Controllers (TECs).

Metal flush-mount room temperature sensor with 10K, Type II thermistor. This unit is self-contained, non-intrusive, and tamper-resistant.

Metal guard for plasatic flush mount sensors. Includes two mounting screws.

The Flush Mount Room Temperature Sensor is a 10K ohm self-contained, non-intrusive and tamper-resistant unit. The sensor connects to the RJ-11 port of the controller via a pre-terminated cable. This unit has a white plastic cover.

The Flush Mount Room Temperature Sensor is a 10K ohm self-contained, non-intrusive, and tamper-resistant unit. The sensor connects to the RJ-11 port of the controller via a pre-terminated cable. This unit has a beige plastic cover.

This Surface Mounted Pipe Thermistor Sensor measures 1.25" and features clamps and provides input for cost-effective, accurate temperature sensing via an 18 AWG twisted, shielded cable pair. The sensor resistance varies proportionally to the temperature b

Flexible averaging duct sensor with a 100K ohm NTC sensing element. This unit has a 6-foot (182 cm) probe.

Flexible averaging duct sensor with a 100K ohm NTC sensing element. This unit has a 3-foot (91 cm) probe.

Rigid averaging duct sensor with a 100K ohm sensing element. This unit has an 18-inch (45 cm) probe.

The TEC Duct Point Temperature Sensors provide an input for temperature monitoring and control to the Terminal Equipment Controllers (TECs).

Flush mount room temperature sensor with a 10,000 Ohm (Type II) NTC sensing element. This room sensor has a temperature range of –40 to 257 deg F (-40 to 125 deg C) and is designed for those applications where a covered room temperature sensor is not acce

Flush mount room temperature sensor with a 10,000 Ohm (Type II) NTC sensing element. This room sensor has a temperature range of –40 to 257 deg F (-40 to 125 deg C) and is designed for those applications where a covered room temperature sensor is not acce

Metal flush-mount room temperature sensor with 100K ohm thermistor. This unit is self-contained, non-intrusive, and tamper-resistant.

This Rigid Duct Point Temperature Sensor measures 4" and provides input for cost-effective, accurate temperature sensing to the Modular Building Controller (MBC), Remote Building Controller (RBC), Stand-alone Control Unit (SCU), MPU and Terminal Equipment

Flush mount room temperature sensor with a 100,000 Ohm (NTC) sensing element. This room sensor has a temperature range of –40 to 257 deg F (-40 to 125 deg C) and is designed for those applications where a covered room temperature sensor is not acceptable.

Flush mount room temperature sensor with a 100,000 Ohm (NTC) sensing element. This room sensor has a temperature range of –40 to 257 deg F (-40 to 125 deg C) and is designed for those applications where a covered room temperature sensor is not acceptable.

This surface mount pipe sensor provides input for accurate loop-powered temperature sensing for controllers. It has a temperature range of 30 to 250 degrees Fahrenheit and a mid-range accuracy of +/- 1.1 degrees Fahrenheit. This pipe sensor has a 2" x 4

This outdoor air sensor provides input for cost-effective, accurate temperature sensing via an 18 AWG twisted, shielded cable pair. The sensor resistance varies proportionally to the temperature being measured and has a 100,000 Ohm reference resistance at

Immersion Well Pipe Sensor Repair Kit, NTC 100K Ohm, Type II.

Liquid immersion temperature sensor with 100K ohm Type 2 thermistor. Temperature range from 30 to 240 degrees Fahrenheit (-1 to 116 degrees Celsius). Element is 6 inches (15 cm) long.

Liquid immersion temperature sensor with 100K ohm Type 2 thermistor. Temperature range from 30 to 240 degrees Fahrenheit (-1 to 116 degrees Celsius). Element is 4 inches (10 cm) long.

Liquid immersion temperature sensor with 100K ohm Type 2 thermistor. Temperature range from 30 to 240 degrees Fahrenheit (-1 to 116 degrees Celsius). Element is 2.5 inches (5 cm) long.

Immersion Well Repair Kit, 20 to 70 degrees F, 4 to 20 mA.

Liquid immersion temperature sensor, 6-inches (15.2 cm) long. Temperature range from 20 to 70 degrees Fahrenheit and a 4 to 20 mA output.

Liquid immersion temperature sensor, 4-inches (10.2 cm) long. Temperature range from 20 to 70 degrees Fahrenheit and a 4 to 20 mA output.

Liquid immersion temperature sensor, 2.5-inches (6.4 cm) long. Temperature range from 20 to 70 degrees Fahrenheit and a 4 to 20 mA output.

This outdoor air sensor provides input for accurate loop-powered temperature sensing for controllers. It has a temperature range of -58 to 122 degrees Fahrenheit and a mid-range accuracy of +/- 0.6 degrees Fahrenheit. This sensor allows through-the-wall m

Immersion Well Pipe Sensor Repair Kit, 30 to 250 degrees F, 40 to mA.

Liquid immersion temperature sensor, 6-inches (15.2 cm) long. Temerature range from 30 to 250 degrees Fahrenheit and a 4 to 20 mA output.

Liquid immersion temperture sensor, 4-inches (10.2 cm) long. Temperature range from 30 to 250 degrees Fahrenheit and a 4 to 20 mA output.

Liquid immersion temperature sensor, 2.5-inches (6.4 cm) long. Temperature range from 30º to 250ºF and a 4 to 20 mA output.

The Air Velocity Averaging Sensor Kit is used with either static or differential air pressure sensing devices, to measure average static or differential pressure across a duct. This kit is used in situations where a terminal box manufacturer-supplied sens

The Air Velocity Averaging Sensor Kit is used with either static or differential air pressure sensing devices, to measure average static or differential pressure across a duct. This kit is used in situations where a terminal box manufacturer-supplied sens

The Air Velocity Averaging Sensor Kit is used with either static or differential air pressure sensing devices, to measure average static or differential pressure across a duct. This kit is used in situations where a terminal box manufacturer-supplied sens

The Air Velocity Averaging Sensor Kit is used with either static or differential air pressure sensing devices, to measure average static or differential pressure across a duct. This kit is used in situations where a terminal box manufacturer-supplied sens

The Air Velocity Averaging Sensor Kit is used with either static or differential air pressure sensing devices, to measure average static or differential pressure across a duct. This kit is used in situations where a terminal box manufacturer-supplied sens

Rigid single point duct sensor with a 100K ohm platinum NTC Type II sensing element. This unit has an 8-Inch (20 cm) probe.

Rigid single point duct sensor with a 100K ohm platinum NTC Type II sensing element. This unit has a 4-Inch (10 cm) probe.