Blog

Setup A: Worst Case Typical installation. The actuator is in an enclosed environment with very little cooling. No insulation on pipe nor venting. Setup B: Good To insulate the pipe will drastically reduce ambient temperature at the actuator level. Easy to accomplish and low cost. Setup C: Best of all Combination of insulation and extra vent added. Not always easy to accomplish. Ambient temperature will not be an issue. Note: Spartan Actuator uses a high temperature resistant …

Description The SimplyVAV series of controllers are an easy and unique approach to operating a wide variety of VAV terminal units. The integrated actuators, internal airflow sensors, and wide variety of application programs make these BACnet Application Specific Controllers ideal for either new or retrofit installations. Easy to install Just mount the controller, wire it to a 24 volt transformer, and then connect airflow and temperature sensors. A SimplyVAV controller automati …

CPU-0600 INTRODUCTION The CPU-0600 is designed to be a stand-alone Outdoor Reset Control device. The purpose and function of the CPU-0600 is to provide control for multiple applications. The applications are selectable through a full touch screen display on the programming interface and consist of Boiler, Mixing, Differential Setpoint, Dual Setpoint and Pump Sequencer. The CPU-0600 is a Wi-Fi enabled control that allows access through the HBX Sensorlinx mobile app. Boiler Contro …