NT-PWIRE-2

Phantom wire kit for installation where a common wire is not available in the existing thermostat cable. DEVICE ASSEMBLY at HVAC EQUIPMENTRated Voltage: 20V to 30V 24VAC nominalRated Output Current: 5A / 250VAC,   5A / 28VDCThermostat Terminations: All Screwless,  G – Green,  R – Red, W – White,  Y – YellowEquipment Wires:  9” with Stripped & Tinned Ends,  R – Red (24VAC+),  C – Black (24VAC Common), W – White (Heat),  Y – Yellow (Cool),  G – Green (Fan) Jumpers: JP1 – Remove Jumper to Disable LEDs DIODE ASSEMBLY at THERMOSTATDiode Assembly Terminations: Y – Yellow (Cool),  G – Green (Fan),  B – Blue (Connect to Thermostat YELLOW wire)Thermostat Terminations:  R – Red (24VAC+),  C – 24VAC Common (Green),  W – Heat (White),Y - Connect to Diode Assembly BLUE wire   The NT-PWIRE Phantom Wire device allows the installer to connect any NetX thermostat when a common wire is not available in the existing thermostat cable.  This handy device creates a phantom wire. In many existing installations, older thermostat cables don't have a common (24VAC common) wire because they were not needed for the mechanical thermostats originally installed. Years ago, it was typical for the cable to only have four (4) conductors. The NT-PWIRE creates the common wire so the HVAC unit can be used along with any NetX thermostat or just about any other thermostat requiring a 24VAC common.  Additionally, the NT-PWIRE includes screwless terminals, color-coded wiring for the HVAC unit connection, and LEDs on the unit to show power, heat, cool, and fan calls are being created from the thermostat, practically eliminating troubleshooting.   240151 NT-PWIRE Spec Sheet 240154 NT-PWIRE Manual