Blog

RIB POWER PACKS are designed to provide low voltage power to the ever-increasing sensor systems of today’s building automation systems. With an on-board 20 Amp rated relay, RIB POWER PACKS come ready to switch line voltage to your load when the low voltage control signal is received. Check out some of the features! On-board 20 Amp rated SPDT relayRequires input power anywhere between 120-277Vac24Vdc, Class 2 rated outputModel RIB21BPP5 (5W) provides up to 210mA @ 24VdcModel RIB21BPP10 (10W) pro …

CPU-1000 - Central Processing UnitSimple to install and understand but integrated with "Behind the Scenes" sophistication to tackle the toughest HVAC design applications. Intentionally built with both the installer and end-user in mind. The HBX CPU-1000 is a fully integrated control unit based on indoor/outdoor reset technology. This intelligent controller used a PID algorithm, that learns and adapts itself to both the external and internal environment making adjustments to the heating or coolin …

Description and Application These compact but powerful direct-coupled ControlSet® actuators provide two-position, tri-state, or proportional control for dampers or valves in HVAC systems. Efficient, durable, capacitor-driven fail-safe with switch-selectable direction provides consistent torque in both powered and fail-safe modes. A patented noise reducer provides whisper-quiet operation in both modes. A minimum torque of 25 (MEP-42xx), 45 (MEP-45xx), or 90 (MEP-49xx) in-lb. is availa …

The HBX Single Zone (SGL-0600) is designed to control most common HVAC systems and provides flexibility to integrate heating or cooling systems with multiple devices including forced air heating/cooling, radiant heating/cooling, heat pumps, fancoils and humidifier/dehumidifier.Two Wire SolutionThe single zone includes a Wi-Fi enabled full-colour touchscreen thermostat (THM-0600) and relay box to control your heating and cooling equipment. The THM-0600 thermostat is a 2 wire (power and communicat …

DESCRIPTION The KMC Controls BAC-5051AE is a multi-port BACnet router. It is powerful enough for heavy network traffic and small enough to use as a control technician’s service tool. Routing Install the BAC-5051AE for BACnet IP, Ethernet, and MS/TP routing. IP routing is fully compliant with BACnet Standard 134-2012, Annex J. Browser Configuration Configure the BAC-5051AE using only an Internet browser. There is no special software to learn or load. Flexible Mounting Two mou …