TCS SL2108 Eight Channel Lighting Control Module

Description

The SL2108 is a microprocessor based lighting control module designed to control up to eight lighting channels.

Features:

• Stand-alone or network operation

• 365-day programming for each circuit

• Analog inputs for photo sensors with the ability to remotely adjust sensitivity level

• Analog input for energy consumption

• Digital photocell inputs

• Astronomical clock

• Remote or local override of each circuit

• External time clock or occupancy sensor input for each circuit

• LEDs for monitoring status

• No battery required for control parameters, schedules or clock

• Vanishing holidays

• End of occupancy blink warning

• Selectable normally open or normally closed relay outputs

Specifications:

General Accuracy: +/- 0.5%
Programming: EIA RS485 interface
Communications: RS485, half duplex
Memory backup: Non-volatile EEPROM, no battery required
Environmental Operating temperature: 32 to 131°F (0 to 55°C)
Operating humidity: 0 to 100% RH, noncondensing
Storage temperature: 14 to 140°F (-10 to 60°C)
Electrical Supply voltage: 24 VAC, +/-20%
Inputs: eight momentary override, eight digital (dry contact), and two selectable 0 to 5 VAC or 4 to 20 mA DC analog
Outputs: ten digital (SPST dry contact, 24VAC @ 2A) configurable
Analog input impedance: 250 W
Common mode rejection: 100 db @ 60 Hz
Power consumption: 15 VA max.
Specifications subject to change without notice.