Description
Eight Channel Lighting Control Module 2 analog inputs, 8 digital inputs, 10 digital outputs
Features:
- Stand-alone or network operation
- 365-day programming for each circuit
- Analog inputs for photo sensors with the ability to remotely adjust sensitivity level
- Analog input for energy consumption
- Digital photocell inputs
- Astronomical clock
- Remote or local override of each circuit
- External time clock or occupancy sensor input for each circuit
- LEDs for monitoring status
- No battery required for control parameters, schedules or clock
- Vanishing holidays
- End of occupancy blink warning
- Selectable normally open or normally closed relay outputs
SPECIFICATIONS:
General
Accuracy: +/- 0.5%
Programming: EIA RS485 interface
Communications: RS485, half duplex
Memory backup: Non-volatile EEPROM, no battery required
Environmental
Operating temperature: 32 to 131°F (0 to 55°C)
Operating humidity: 0 to 100% RH, noncondensing
Storage temperature: 14 to 140°F (-10 to 60°C)
Electrical
Supply voltage: 24 VAC, +/-20%
Inputs: eight momentary override, eight digital (dry contact), and two selectable 0 to 5 VAC or 4 to 20 mA DC analog
Outputs: ten digital (SPST dry contact, 24VAC @ 2A) configurable
Analog input impedance: 250 W
Common mode rejection: 100 db @ 60 Hz
Power consumption: 15 VA max.
Specifications subject to change without notice.